FUJITSU 10 ppm - Manual (Page 77)

4-2 User’s Manual
To install the RAM card, first make sure the printer is turned off and
follow these steps:
1. Open the upper door and
right side cover of the
printer. You will see a small
cover on the metal plate.
Remove the fastening screw
and the cover. You can now
see three connectors (upper
two ivory ones for RAM
cards).
2. Orient the RAM card. Hold
the card with the cut corner
down and facing left and
insert the card aslant into
connector.
You can install two memory expansion cards. The expansion card can
have 1, 2, 4, 8, 16, or 32 megabytes of RAM. Together with the printer’s
resident memory (3 megabytes), these expansion options offer a range of
RAM from 3 to 67 megabytes.
Adding RAM
Insert with cut
facing down and to the left
(8MB card)
* Cover, removed
Use upper two
ivory connectors