FUJITSU 10 ppm - Manual (Page 123)

6-14 User’s Manual
These conditions, not errors, require you to take action. The following
table lists the message indications, explains causes, and suggests solutions.
Message Causes and solutions
INSERT size Cause: Printer is ready for paper.
Solution: Put paper into manual feed slot.
READY TONER LOW Cause: Toner runs short.
Solution: Prepare new toner bottle.
READY REPLACE PARTS Cause: Print unit is near end.
Solutions: Replace print unit.
Note: Enter menu mode and select Clear
Warning. After replacement, be sure to
press
ENTER
to perform Clear Warning.
Important:
If the upper door is not firmly closed or the paper guide is not in the
locked position, the printer does not work.
Action-required Status Indications
Action-required
Status
Indications
✍
Paper guide
Rear stacker
Upper door