FUJITSU 10 ppm - Manual (Page 73)

3-28 User’s Manual
Release the paper once it begins to feed automatically. If your file has
additional pages, the printer prompts you for another sheet.
Setting Up the Rear Stacker
This printer has a rear stacker that allows you to eject sheets straight out
the back to minimize curl. Use the rear stacker to print envelopes,
overhead transparencies, and labels.
To use the rear stacker, follow these steps:
1. Open the rear stacker. Pull
the projections at the top of
the stacker.
2. Remove the paper support
from inside the stacker.
3. Set the paper support in
position. Insert the two ends
of the paper support into the
mounting grooves of the rear
stacker.
Handling Paper
Paper support