FUJITSU 10 ppm - Manual (Page 30)

User’s Manual 1-15
GETTING
STARTED
Connecting the Printer to Your Computer
Printing a Test Page Offline
The printer has a status report function which prints a page summarizing
printer option settings and showing samples of resident fonts. Use this
function to check the printer performance offline.
1. Turn the printer on. The
printer initializes the
mechanism and then enters
the ready state. The message
display indicates
<<>> ,
WARMING UP, then READY .
2. Print a test page offline.
Press the READY button to
put the printer offline (the
ONLINE indicator turns
off). Press the
SELF TEST
button for more than five
seconds. The message display
indicates
SELF TEST and
the DATA indicator flashes.
A status report page is
printed. Check that the
printing is successful.
Notice:
With the FPS card (option) installed in the printer, the status report is
for either the PCL emulation (standard) or the FPS emulation depending
on the emulation you used for printing the last document; however, the
status report is for the FPS emulation if it is printed immediately after
the printer is turned on. To clearly select the report, use the test menu in
setup mode.
☞
POWER ONLINE DATA ERROR
MFF
PAPER SIZE
PRINT
FONT
SELF
TEST
RESET
CONT. ENTER –
+ MENU READY
FORM
FEED
RESET
MENU
TRAY
SELECT
READY