FUJITSU 10 ppm - Manual (Page 112)

User’s Manual 6-3
SOLVING
PROBLEMS
4a. Pull out the tray and raise
the left and right levers of
the feed roller.
Remove the sheet.
After removing the sheet,
return the two levers to their
original positions (pull the
levers down toward you).
Notice:
Leaving the two levers raised causes damage to the levers when the print
unit is installed and pressed down.
4b.Remove the sheet.
Caution:
Do not touch the heat roller. This hot area may burn your hand. See the
label attached to the upper door.
Clearing Paper Jams
☞
!