FUJITSU SPARC ENTERPRISE M5000 - Manual (Page 67)

Chapter 2 Fault Isolation 2-29
The following example shows output for the prtdiag command in verbose mode.
# prtdiag -v
System Configuration: Sun Microsystems sun4u Sun SPARC Enterprise M5000 Server
System clock frequency: 1012 MHz
Memory size: 8064 Megabytes
==================================== CPUs ====================================
CPU CPU Run L2$ CPU CPU
LSB Chip ID MHz MB Impl. Mask
--- ---- -------------------- ---- --- ----- ----
00 0 0, 1, 2, 3 2150 4.0 6 129
00 1 8, 9, 10, 11 2150 4.0 6 129
====================== Memory Configuration ======================
Memory Available Memory DIMM Number of
LSB Group Size Status Size DIMMs
--- ------ ------------------ ------- ------ ---------
00 A 4096MB okay 1024MB 8
00 B 3968MB okay 1024MB 8
========================= IO Cards =========================
LSB Name Model
--- -------------- ------------
00 scsi LSI,1064
00 network N/A
00 network N/A
00 network SUNW,pci-ce
00 fp N/A
00 SUNW,qlc QLE2462
00 fp N/A
00 SUNW,qlc QLE2462
==================== Hardware Revisions ====================
System PROM revisions:
----------------------
OBP 4.x.build_103***PROTOTYPE BUILD*** 2006/08/01 02:06
=================== Environmental Status ===================
Mode switch is in UNLOCK mode
#