Furuno UAIS TRANPONDER FA-150 - Manual (Page 69)

2. INLAND AIS
2-20
[CREATE MSG]
SET MSG TYPE E
VIEW MSG
SEND MSG
5. SET MSG TYPE is selected; press the ENT key.
[SET MSG TYPE]
ADRS TYPE:
BROAD CAST
MMSI : - - - - - - - - -
TYPE: SOLAS (IFM16)
CHANNEL: ALTERNATE
RETRY TIMES: -
MMS
6. ADRS TYPE is selected; press the ENT key.
BROAD CAST
ADRS CAST
7. Select ADRS CAST to send a message to a specific AIS-equipped ship or
authority, or BROAD CAST to send a message to all AIS-equipped ships
within broadcasting range. Press the ENT key.
8. For BROAD CAST, go to step 9. For ADRS CAST, select MMSI then press
the ENT key. Enter the MMSI of the vessel which you want to receive your
message then press the ENT key.
9. Select TYPE then press the ENT key.
SOLAS(IFM16)
INLAND(RFM55)
9. Select SOLAS(IFM16) or INLAND(RFM55) as applicable then press the
ENT key.
SOLAS(IFM16): Send no. of persons.
INLAND(RFM55): Send no. of crew, passengers and shipboard personnel.
10. CHANNEL is selected; press the ENT key.
ALTERNATE
BOTH A & B
A
B
11. Select the channel to use to send the message then press the ENT key.
12. RETRY TIMES is selected; press the ENT key.
13. Enter the number of times to re-send the message (if the first transmission
is unsuccessful) then press the ENT key.