Furuno UAIS TRANPONDER FA-150 - Manual (Page 66)

2. INLAND AIS
2-17
13. Select SET DESTINATION then press the ENT key.
[SET DESTINATION]
* * * * * * * * * * * * * (0/0)
[NEW?]
(If you have entered some
destinations, they appear here.)
14. NEW is selected. If your destination is shown on screen, select it, press the
ENT key then go to step 18. To enter a new destination, go to step 15.
15. With NEW selected, press the ENT key.
[SET DESTINATION]
ENTER A NEW DEST
COUNTRY CODE:
LOCATION CODE:
FAIRWAY NO. :
00000
TERMINAL CODE:
FAIRWAY HECT:
00000
QUIT: [MENU]
UN country code, two 6 bit characters
UN location code, three 6 bit characters
Fairway section no., five 6 bit characters
Terminal code, five 6 bit characters
Fairway hectometre, five 6 bit characters
16. COUNTRY CODE is selected; press the ENT key. Enter the UN country
code of your destination, referring to ISO 3166, then press the ENT key.
17. Enter location code, fairway no., terminal code, and fairway hectometre,
referring to the ERI (Electronic Reporting International) Guide Part IV
Annex 2 for examples.
Note: To see the results of an entry, show the SET DESTINATION screen.
[SET DESTINATION]
* * * * * * * * * * * * * (0/1)
[NEW?]
NLRTM02552LEUVE00000
Country Code
Location Code
Fairway No.
Terminal Code
Fairway Hectometer
18. Press the MENU key twice to return to the CREATE MSG menu.