Furuno UAIS TRANPONDER FA-150 - Manual (Page 18)

1. OPERATION
1-7
1.5 Entering Voyage-Related Data
There are six items on the NAV STATUS menu that you will need to enter at
the start of a voyage.
• Navigation status • Cargo type • Arrival time
• Destination • No. of persons • Draught
1. Press the NAV STATUS key to open the NAV STATUS menu.
2. If your navigation status is different from that shown, follow the procedure
below. If it is the same as shown, go to step 3.
a) Press the ENT key.
b) Press ▲ or ▼ to select appropriate status then press the ENT key. Refer
to the data below to select appropriate nav status.
00:
UNDER WAY USING ENGINE
01: AT ANCHOR
02: NOT UNDER COMMAND
03: RESTRICTED MANEUVERABILITY
04: CONSTRAINED BY HER DRAUGHT
05: MOORED
06: AGROUND
07:
ENGAGED IN FISHING-TRAWLING
08: UNDER WAY SAILING
09: ENGAGED IN FISHING OTHER THAN TRAWLING
10: AIR-CUSHION VESSEL IN NON-DISPLACEMENT MODE OR WIG
CRAFT TAKING OFF, LANDING OR IN FLIGHT
11: POWER-DRIVEN
VESSEL TOWING ASTERN
12: POWER-DRIVEN VESSEL PUSHING AHEAD OR TOWING
ALONGSIDE
13:
IN DISTRESS OR REQUIRING ASSISTANCE
14: AIS-SART (ACTIVE), SEEKING TO ATTRACT ATTENTION*
* Input not possible. “ERROR REGIST PRESS ANY KEY” appears.
15:
NOT DEFINED (DEFAULT), AIS-SART (TEST)
3. Press ► to show the DESTINATION sub-menu.