2 receiving messages – Furuno UAIS TRANPONDER FA-150 User Manual
Page 38

1. OPERATION
1-27
19. Press ◄ to select YES then press the ENT key to send your message.
Message status is shown as follows:
AIS message status messages and their meanings
Message Meaning
NOW SENDING.
Message is being sent.
SEND MESSAGE COMPLETE.
PRESS ANY KEY
Transmission of message completed. (MMSI is
additionally shown in case of addressed message.)
SEND MESSAGE UNSUCCESSFUL.
PRESS ANY KEY
Message could not be sent.
SEND MESSAGE UNSUCCESSFUL.
MMSI: XXXXXXXXX
PRESS ANY KEY
Message sent successfully, however there is no reply
from receiver of message.
NOW WAITING RESPONSE.
PRESS ANY KEY
You tried to send a message while the transponder is
awaiting receive confirmation (successful or
unsuccessful) for the first-sent message. After
confirmation is received, the next sequential message
will be sent.
1.8.2 Receiving
messages
How to view a received message
When a message is received, the window below appears on the display. To
view the contents of the message follow the procedure below.
MESSAGE !
PRESS ANY KEY
1. Press any key to erase the message.
2. Press the MENU key to show the main menu.
3. Select MSG then press the ENT key.
4. Select RX LOG then press the ENT key.
Date and time
message received
("NEW" displayed for
unread message)
1/3[
] MSG[ENT] QUIT[MENU]
MMSI of sender
[RX LOG]
03/MAY 13:25 NEW
[UTC] FROM: 4310199111
28/MAR 03:43
[UTC] FROM: 431099111
22/MAR 18:00
[UTC] FROM: 431099111