FujiFilm F601 - Manual (Page 7)

12 13
1
Gold marking
0 4
0 5
1Slide the battery cover out to open it.
2Hold the battery so that the indicator are
aligned and then slide it into the camera.
3Press on the part near the indicator until the
battery lock catch locks the battery into place.
● ! Do not apply excessive force to the battery cover.
LOADING THE BATTERY AND SmartMedia ™
Indicator
Battery lock release button
Battery lock lever
0 1
0 2
0 3
Never open the battery cover while the
camera is still switched on. This could
damage the SmartMedia or corrupt the
image files on the SmartMedia.
◆
When you’ve finished shooting and you
want to remove or replace the battery
◆
4Push the SmartMedia firmly into the
SmartMedia slot as far as it will go.
5Close the battery cover.
●
! If you open the battery cover while the camera is
switched on, the camera automatically switches off
to protect the data on the SmartMedia.
● ! The SmartMedia will not slide fully into the slot if it is
inserted facing the wrong way. Be careful not to
apply undue force to the SmartMedia.
●
! To protect the SmartMedia, always store it in the
special anti-static case.
Open the battery cover and press the battery
lock release button to release the lock.
● ! Always switch the camera off when replacing
the battery.
◆ When you’ve finished shooting and
want to remove or replace the
SmartMedia
◆
Open the battery cover, grasp the SmartMedia
with your fingertips and pull it out.