FujiFilm F601 - Manual (Page 50)

98 99
5
Place an “ p ” mark under all the images you do
not want to record and then press the
“MENU/OK” button to record the remaining
images.
When Previewing is selected, you can choose which
images to record in continuous shooting and auto
bracketing. However, preview zoom cannot be used.
1Use “d” and “c” to select the images you do not
want to record.
2Press “b( { )” to add or remove the “ p ” mark.
The “ p ” mark appears and the image is not
recorded.
Selecting Recorded Images
This setting allows you to specify whether the
resulting image is displayed after you take a shot.
OFF : The photographed image is automatically
recorded without being displayed.
POSTVIEW: The photographed image is displayed
for about 2 seconds and is then
automatically recorded.
PREVIEW : The photographed image is displayed
and you can then select whether to
record the image.
You can also select preview zoom and
recorded images.
h Press “MENU/OK” to record the image.
h Press “BACK” to discard the image.
When PREVIEW is selected, you can enlarge
the image for detailed checking.
1Use “a(
P )” or “b( { )” to zoom in or out.
2Press the “DISP” button.
3You can move the field of view in 8 directions.
4Press the “DISP” button again to revert to
zoomed display.
Preview Zoom
●
! Trimming in the preview image is not saved.
● ! The operation procedure is the same as for playback
zoom (
➡P.34).
0 4
0 1
0 2 0 3
● ! In Continuous Shooting and Auto Bracketing modes,
images are displayed for a set time and then
automatically recorded even when “OFF” is selected
as the “IMAGE DISPLAY” setting.
1
2
0 1 0 2
g IMAGE DISPLAY
SET–UP