FujiFilm F601 - Manual (Page 31)

60 61
3
When you take a series of shots, the resulting
shots are displayed (shown in order from left to
right) and automatically saved.
●
! The focus and exposure are determined for the first
frame and cannot be changed during shooting.
● ! The results of the shot are displayed even when the
photographed image display is set to OFF (
➡P.98).
● ! The time required to record a file is approximately
6 seconds in “3 NORMAL” mode (for 4-frame
continuous shooting).
If you want to select the shots to be recorded, see P.98, 99.
When you are taking continuous shots, “ t ”
appears on the LCD monitor.
When you are using Auto Bracketing, “
[ ”
appears on the LCD monitor.
When you take a picture, the resulting shots are
displayed (
Acorrect exposure, Boverexposed,
Cunderexposed) and then automatically saved.
● ! The focus is determined for the first frame and
cannot be changed during shooting.
● ! The results of the shot are displayed even when the
photographed image display is set to OFF (
➡ P.98).
●
! The continuous photography speed is the same
regardless of the quality and file size settings.
● ! The camera always shoots 3 image frames in Auto
Bracketing. However, if there is insufficient space on
the SmartMedia for 3 shots, no picture will be taken.
Setting “ t ” Continuous shooting to ON allows
you to take up to 4 continuous shots with a
minimum interval between shots of 0.2 seconds.
When you specify “
[ ” Auto Bracketing, the
camera automatically shoots 3 continuous
frames with staggered settings to give an
underexposed image, a correctly exposed image
and an overexposed image.
hThree types of Auto Bracketing are provided
(± 1/3 EV, ± 2/3 EV and ± 1 EV).
See P.128 for information on EV.
t CONTINUOUS SHOOTING
PHOTOGRAPHY MENU
Continuous Shooting Auto Bracketing