FujiFilm F601 - Manual (Page 60)

118 119
Notes on the SmartMedia ™
h Do not carry SmartMedia in locations such as a
trouser pocket. This could subject the SmartMedia to
excessive force when you sit down, thereby
damaging the SmartMedia.
h The SmartMedia may feel warm when it is removed
from the camera after extended periods of picture
taking or image viewing. This is normal and does not
indicate a fault.
h Inserting a SmartMedia that is charged with static
electricity into your camera may result in a camera
malfunction. If this occurs, switch the camera off and
then on again.
h Affix the label onto the designated area of the card.
Do not use third-party labels as this can lead to
problems when the card is inserted or removed.
h When you attach the label, take care that it does not
cover any of the write-protect area.
■Notes on Using SmartMedia with a PC
h If you intend to take photos using a SmartMedia that
has been used on a PC, format the SmartMedia on
your camera.
h When you format a SmartMedia in the camera and
then shoot and record images, a directory (folder) is
automatically created. Image data is then recorded in
this directory.
h Do not change or delete the directory (folder) names
or file names on the SmartMedia from your PC as this
will make it impossible to use the SmartMedia in your
camera.
h Always use the camera to erase image data on a
SmartMedia.
h To edit image data, copy the image data to the PC’s
hard disk and then edit the copied data.
Be sure to use your PC’s disk eject function
(right-click the removable disk icon in the “My
Computer” window and then click “Eject”) when
you eject a SmartMedia from the PC card reader
or PC card adapter.
When you are using a USB connection, you
should also select and left-click the eject button
for “USB disc/mass storage” in the taskbar.
If you do not use the correct eject procedure,
the SmartMedia may be damaged due to write-
behind cashing.
■Specifications
Type Image memory card for digital cameras
(SmartMedia)
Operating voltage 3.3V
Conditions for use Temperature:
0°C to +40°C (+32°F to +104°F)
Humidity:
80% or less (no condensation)
Dimensions 37 mm × 45 mm × 0.76 mm
(1.45 in. × 1.77 in. × 0.03 in.) (W × H × D)
Warning Displays
e The table below lists the warnings that are displayed on the LCD monitor
Warning Displayed Explanation Remedy
(Lit red)
(Blinking red)
The battery in the camera is fully depleted or
very low on charge.
There is no SmartMedia loaded or a 5 V
SmartMedia is loaded the wrong way round.
i The SmartMedia is not formatted.
i The SmartMedia contact area is soiled.
i Camera fault.
i The SmartMedia contact area is soiled.
i The SmartMedia is damaged.
i The SmartMedia format is incorrect.
i Camera fault.
The SmartMedia is fully recorded.
The SmartMedia is write-protected.
Replace the battery or have new battery ready.
Load the SmartMedia (3.3V) in the correct
direction.
i Wipe the contact area on the SmartMedia with
a soft dry cloth. It may be necessary to format
the SmartMedia. If the error message is still
displayed, replace the SmartMedia.
i Contact your FUJIFILM dealer.
i Wipe the contact area on the SmartMedia with
a soft dry cloth. It may be necessary to format
the SmartMedia. If the error message is still
displayed, replace the SmartMedia.
i Contact your FUJIFILM dealer.
Use a SmartMedia that is not write-protected.
Erase some images or use a SmartMedia that
has ample free space.