FUJITSU fi-6130 - Manual (Page 25)

HINT
●
Pull out the paper chute extensions to support the document when necessary.
Paper chute extensions
●
ID cards can be loaded either in vertical or holizontal orientation.
ATTENTION
This scanner can scan ID cards through the Automatic Document Feeder with the following
precautions.
●
You can place up to three cards at a time into the Automatic Document Feeder.
If the card is embossed (i.e., a card with raised lettering), place one card at a time.
●
It is recommended that the front side of the card be placed face down in the
Automatic Document Feeder.
●
The card to be scanned should be within the ISO7810 compliance, type ID-1.
Dimensions: 3.4 inch (height) x 2.1 inch (width)/ 86 mm x 54 mm
Thickness: 0.056 inches / 1.4 mm or less
Material:
PVC (Poly vinyl chloride) or PVCA (Polyvinyl chloride acetate)