FUJITSU fi-6130 - Manual (Page 183)

Start: The start point of the
check area in length (mm)
from top edge of the document
is specified.
0 to 510 mm (with 2 mm increment) 0 mm
End: The end point of the
check area in length (mm)
from top edge of the document
is specified.
0 to 510 mm (with 2 mm increment) 0 mm
Number of paper
feeding retries Specify the picking retry times
when picking fails during
scanning.
1 to 12 7
Useful life counter When the Page counter
(Consumable counter)
described in Section " 5.2 How
to Check and Reset the
Consumables Counters
"
exceeds the value specified
here, the counter back-ground
color becomes yellow.
For each consumable
10,000 to 2,550,000 with 10,000
increment
200,000
Manual-feed timeout Specify the standby time
period. After the predetermined
time period has elapsed,
manual feeding is canceled.
Disable/Enable
When enabled: 5, 10, 20, 30, 40, 50, 60,
70, 80, 90, 100, 110 (seconds)
Disable
Power SW Control Specify whether or not to
enable power switch.
Enable power switch/Disable power switch Enable power
switch
All Rights Reserved. Copyright 2007 © PFU LIMITED