FUJITSU fi-6130 - Manual (Page 101)

HINT
When a double-sided document is scanned in Duplex mode, the scanned document image is
output according to the [Flip Side Rotation] setting in the order presented below:
●
Book: Upper half → Lower half
●
Fanfold: Lower half → Upper half
ATTENTION
If one of the following settings is set, this function is not available.
●
Multi Image Output
●
Color/Monochrome Auto Detection
●
The resolution is set to 1200dpi
7. Click the [OK] button.
You are returned to the [TWAIN Driver] dialog box.
8. In the [TWAIN Driver] dialog box, click the [OK] button.
Changes made are saved and the [TWAIN Driver] dialog box closes.
9. From the ScandAll PRO window, perform a scan.
For information about how to scan documents, see Section " 2.6 How to Use ScandAll PRO. "
Scanned document images are displayed in the ScandAll PRO window.
All Rights Reserved. Copyright 2007 © PFU LIMITED