FUJITSU fi-6130 - Manual (Page 130)

fi-6130 / fi-6230 Image Scanner Operator's Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
5.1 Consumables and Replacement Cycles
The following table shows the specifications of consumables and their standard replacement cycle. It is recommended that
you stock extra consumables before the ones in the scanner reach the end of their service life. The consumables must be
replaced periodically. You can check the number of scanned pages for the Brake roller unit and the Pick roller unit by
referring to each counter on this scanner. For how to check the count, see Section " 5.2 How to Check and Reset the
Consumables Counters. "
Description P/N Standard Replacement Cycle
Brake roller PA03540-0001 After 200,000 sheets or one year
Pick roller PA03540-0002 After 200,000 sheets or one year
The replacement cycles above are rough guidelines for the case of using A4/Letter woodfree or wood containing paper 64 g/
m2 (17 lb). This cycle varies according to the type of the paper used and how frequently the scanner is used and cleaned.
ATTENTION
Use only the specified consumables to avoid document feeding trouble.
To purchase the consumables, contact the FUJITSU scanner dealer where you purchased the scanner or an authorized
FUJITSU scanner service provider.
All Rights Reserved. Copyright 2007 © PFU LIMITED