Offset setting, Vertical magnification adjustment – FUJITSU fi-6130 User Manual
Page 185
fi-6130 / fi-6230 Image Scanner Operator's Guide
CONTENTS MAP
8.3 Offset/Scan Scale
When the position of the scanned image is not correct or the image is elongated, use the following procedure to adjust the
Offset and the Scan scale for correction.
ATTENTION
The factory default settings are appropriate, so normally there is no need to make any
adjustment.
1. Start up the Software Operation Panel.
See Section "
"
2. Select [Device Setting] from the left side list in the window, and click [Offset].
3. Adjust the Offset/Scan scale as necessary.
This manual is related to the following products: