Intelligent multifeed function, Before using this function – FUJITSU fi-6130 User Manual
Page 118
fi-6130 / fi-6230 Image Scanner Operator's Guide
CONTENTS MAP
3.18 Not Detecting Multifeed for Fixed Format
When sheets with glued photographs or sticky notes are scanned, the scanner can accidentally detect a multifeed error, and scanning
is interrupted. This section explains "Intelligent Multifeed Function", or a resolution function that eliminates such a problem (hereinafter
referred to as "this function").
This function has one manual mode as follows:
Intelligent Multifeed Function
Mode
Method to bypass Multifeed
Applicable case
Comments
Manual mode
(Bypass by front
panel button)
When a Multifeed error
occurs, press [Send to] to
eject sheet in the scanner's
transport path. Examine the
last sheet scanned. If no
paper is glued on the
ejected sheet, return the
sheet to the Hopper and
press the [Scan] button.
If glued paper is present on
the ejected sheet, return
the sheet to the Hopper,
press the [Function] button
once (Slow Blink rate of the
function number display
will change to Fast Blink
rate) and press the [Scan]
button. The scanner will not
check for a Multifeed error
on the first sheet being
scanned. The following
sheets are checked for
Multifeed errors with the
already-existing Multifeed
settings in the Software
Operation Panel or driver.
Use this mode when you
want to continue scan-
ning, while checking for
glued paper every time a
multifeed error is detected.
Pages scanned before errors
are sent to memory.
Extraneous images may be
generated during a Multifeed
error.
Before Using This Function
Configure the following settings before using this function:
1. When the ISIS or the TWAIN driver is used; if you want to start scanning by using the [Scan] button
after a multifeed error, configure the driver settings as described below.
[TWAIN driver]
Mark the [Enable Scanner Panel] and [Enable [Scan] Button] checkboxes on the [Startup] tab of the [Option] dialog box.