Furuno MARINE RADAR 1823C - Manual (Page 62)

3-18
Contents of DATA 4 PORT menu
Item Description Settings Default Setting
NMEA Output
Format
Selects NMEA output format. NMEA Ver. 1.5, NMEA
Ver. 2.0
NMEA Ver. 2.0
Baud Rate Sets baud rate. 4800, 9600, 19200 (bps) 4800(bps)
Bit Length Sets character length. 8 bit, 7 bit 8 bit
Stop Bit Sets number of stop bits. 1 bit, 2 bit 1 bit
Parity Sets parity bit. Even, Odd, None Even
SELECT
SNTNC
(soft key)
Chooses data sentences to output. For further details see the illustration “NMEA
data sentences” on page 3-17.
3.7 Remote Controller Setting
A remote controller can be set exclusively for use with a specific display unit, in the case of
multiple NavNet display units. Set the remote controller ID mode desired on the menu and
attach appropriate label (supplied with accessories) to the remote controller and display
unit.
1. Press the [MENU] key followed by the SYSTEM CONFIGURATION and GENERAL
SETUP soft key to show the GENERAL SETUP menu.
GENERAL
SETUP 1
KEY BEEP ON
LANGUAGE ENGLISH
RANGE UNIT nm, kt
TEMPERATURE UNIT
°
C
DEPTH UNIT ft
TEMPERATURE SOURCE ETR
DEPTH SOURCE ETR
RESET TRIP LOG NO
▲
Page 1
NEXT
PAGE
EDIT
RETURN
EDIT
LAT/LON DISPLAY DD
°
MM.MMM'
TD DISPLAY LORAN C
SPEED SOG
POSITION DISPLAY LAT/LON
TIME DISPLAY 24 HOURS
INFRARED REMOTE MODE A
RANGE & BEARING MODE RHUMB LINE
BEARING READOUT MAGNETIC
MAGNETIC VARIATION AUTO 7.0
°
W
▲
Page 2
GENERAL
SETUP 2
EDIT
PREV.
PAGE
GENERAL SETUP menu