Furuno MARINE RADAR 1823C - Manual (Page 48)

3-4
3.3 RADAR SETUP Menu
After the network setup, do the following in order to adjust the radar.
Open the INSTALL SETUP menu, and then press the RADAR SETUP soft key to display
the RADAR SETUP menu. When the message of “RADAR DOES NOT TRANSMIT.
TRANSMIT RADAR?” appears, press the [ENTER] knob to transmit or [CLEAR] key to
cancel transmitting.
RADAR
SETUP
HEADING ADJUST OFF
TOTAL ON TIME 000000.0 h
TOTAL TX TIME 000000.0 h
Page 2
Page 1
▲
EDIT
EDIT
ANTENNA TYPE F
HEADING DATA MAGNETIC
ANTENNA ROTATION ROTATE*
TUNING OFF
TIMING ADJUST OFF
VIDEO ADJUST OFF
M.B. SUPPRESSION OFF
RADAR ANTENNA HEIGHT HIGH
STC CURVE NARROW
MONITOR MODE OFF
▲
RADAR
SETUP
NEXT
PAGE
RETURN
*: Do not change this item setting (excluding 1953C).
PREV.
PAGE
Radar setup menu