Furuno FAR-2807 - Manual (Page 37)

37
Changing track color
Track can be colored red, green, blue, yellow. cyan, magenta, and white. It can be
useful to change the color of ship’s track to clearly differentiate past track from current
track.
Changing the color of your ship’s track
1. Place the cursor in the MENU box then push the left button.
2. Select [5 PLOTTER] then push the left button.
3. Select [3 OWN TRACK] then push the left button.
4. Select [3 TRACK COLOR] then push the left button.
5. Select color desired then push the left button.
6. Push the right button three times to close the menu.
Changing the color of target tracks
1. Put the cursor in the track color selection box at the bottom of the screen.
2. Long-push the left button to select track color changing format (ALL or
IND(ividual).
IND: Change color of specific target’s track.
ALL: Change color of all target tracks.
3. Push the left button to select color. The color selection changes cyclically in the
order of red, blue, green, light-blue, magenta, white, red... .
The color of target tracks can be automatically changed as shown in the table, by set-
ting turning on 5 AUTO TARGET TRACK in the TGT TRACK menu.
TGT TRK
IND/RED
TGT TRK
ALL/RED
Long-push
left button