Furuno GP-7000F - Manual (Page 129)

SP - 1 E4429S00A
SPECIFICATIONS OF GPS PLOTTER/SOUNDER
GP-7000F
1 GENERAL
1.1 Display 7-inch wide color TFT color LCD, 480 (W) x 234 (H) dots
1.2 Projection Mercator
1.3 Usable Area 80° latitude or below
1.4 Display Mode Plotter, Nav Data, Highway display, Compass display
1.5 Alarms Arrival and Anchor watch, Cross track error, Temperature,
Depth, Grounding, Ship’s speed alarms
2 GPS RECEIVER
2.1 Receiving Channels
GPS 12 channels parallel, 12 satellites tracking
WAAS 1 channel
2.2 Rx Frequency 1575.42 MHz
2.3 Rx Code C/A code, WAAS
2.4 Position Fixing System All in view, 8-state Kalman filter
2.5 Position Accuracy
GPS 10 m (95% of the time, HDOP≤ 4)
WAAS 3 m (95% of the time)
2.6 Tracking Velocity 999 kt
2.7 Position-fixing Time Warm start: 12 s approx., Cold start: 90 s approx.
2.8 Position Update Interval 1 s
3 PLOTTER FUNCTIONS
3.1 Effective Projection Area Depending on chart card in use
3.2 Track Display Plot interval: by time
(1 sec, 5 sec, 10 sec, 30 sec, 1 min, 5 min, 10 min, 30 min, 1 h)
or by distance (0.01, 0.05, 0.1, 0.5, 1.0, 2.0, 5.0, 10.0 nm)
3.3 Memory Capacity Track: 12000 points, waypoint: 2000 points
Route: 200 routes with 35 waypoints each
3.4 MOB 1 point
3.5 Quick Routes 1 route
3.6 Electronic Chart Card C-MAP NT+/NT MAX chart SD card