beautypg.com

Connecting the usb communications port, Connecting the network transient protectors – HP R1500 User Manual

Page 18

background image

Installation 18

IMPORTANT: Power management software requires the communications port to be appropriately cabled

to the host computer.

For information about serial port pin assignment, see "Serial communications port pin assignment (on
page

34

)" .

Connecting the USB communications port

Connecting the Network Transient Protectors

CAUTION: To avoid damaging the equipment, use the Network Transient Protector with a standard

telephone line only, not with a digital PBX.

To protect equipment against surges over a network data line:

1.

Connect the network wall jack to the UPS Network Transient Protector IN jack.

See also other documents in the category HP Tools: