HP D315 - Manual (Page 143)

Technical Reference Guide
Table 8-3. Setup Utility Functions Continued
Heading Option Description
Advanced
(Advanced
users only) Power-On Options Allows user to set:
POST mode (QuickBoot, FullBoot, or FullBoot
every 1-30
days)
POST messages (enable/disable)
Safe POST (enable/disable)
POST delay (in seconds: none, 5, 10, 15, 20)
F9 prompt (anable/disable)
F10 prompt (enable/disable)
F12 prompt (enable/disable)
Option ROM prompt (enable/disable)
Remote wakeup boot sequence (remote
server/local hard drive)
After power loss (off/on)
If you connect your computer to an electric power
strip, and would like to turn on power to the
computer using the switch on the power strip, set
this option to on.
Note: If you turn off power to your computer
using the switch on a power strip, you will not
be able to use the suspend/sleep feature or the
Remote Management features.
UUID (Universal Unique Identifier) (enable/disable)
I/O ACPI Mode (enable/disable)
ACPI/USB buffers @ Top of Memory
(enable/disable)
No Keyboard Mode (enable/disable)
Onboard Devices Allows you to set resources for or disable onboard
system devices (diskette controller, serial port,
parallel port).
PCI Devices Lists currently installed PCI devices and their IRQ
settings.
Allows you to reconfigure IRQ settings for these
devices or to disable them entirely.
Continued
Compaq D315 and hp d325 Personal Computers
Featuring the AMD Athlon XP Processor
Second Edition – April 2003
8-9