Wrinkle care, Drum light, Damp dry signal – LG 27 Inch Electric Smart Dryer Owners Guide User Manual
Page 43: Control lock, Cycle list edit, Additional settings
43
OPERATION
EN
G
LI
SH
NOTE
• The
Energy Saver
option is turned on by default
in the
Normal
cycle.
• Turning the
Energy Saver
option off changes
the default cycle to the last cycle used. To return
to the default settings, turn the
Energy Saver
option on.
Wrinkle Care
Selecting this option will tumble the load
periodically for up to 3 hours after the selected
cycle, or until the door is opened. This is helpful in
preventing wrinkles when you are unable to
remove items from the dryer immediately.
Press the
Wrinkle Care
button before you start a
dry cycle.
NOTE
• When the option is turned on, only the
Power
button works after the dry cycle ends.
• To select the option after starting a cycle, pause
the cycle, set the option, and press
Start/Pause
.
• Always turn off the appliance before unloading
the clothes.
Drum Light
The drum is equipped with a white LED light that
illuminates when the dryer is turned on. This light
automatically turns off when the door is closed
and the cycle starts.
• Press the
Options
button, turn the knob to
select
Drum Light
and press the
8
(
OK
) button.
Select
On
and press the
8
(
OK
) button.
• The drum light will turn off automatically after 4
minutes.
Damp Dry Signal
When this option is selected, the appliance signals
when the load is approximately 80% dry. This
allows you to remove faster-drying lightweight
items or items that you would like to iron or hang
while they are still slightly damp.
Press the
Options
button, turn the knob to select
Damp Dry Signal
and press the
8
(
OK
) button.
Select
On
and press the
8
(
OK
) button.
Control Lock
Use this function to disable the controls. This
function can prevent children from changing
cycles or operating the dryer.
NOTE
• The function does not lock the door.
• Once this function is set, all buttons are locked
except the
Power
button.
• When the controls are locked, the
Control Lock
indicator lights up and the dry cycle is shown on
the display.
• Turning off the power will not reset this function.
You must deactivate this function before you can
access any other options and functions.
• To activate/deactivate the function, turn the
dryer on, press the
Options
button, turn the
knob to select
Control Lock
, and press the
8
(
OK
) button. Select
Off
and press the
8
(
OK
)
button.
Cycle List Edit
Edit the list of dry cycles as desired.
1
Press the
Options
button.
2
Turn the knob to select
Cycle List Edit
, and
press the
8
(
OK
) button.
3
Select a dry cycle and press the
8
(
OK
) button.
NOTE
• The
Normal
cycle cannot be deleted.
• The order of cycles in the list can be changed. On
the product, use the
Auto Cycle Optimization
function in the
Additional Settings
menu. In the
LG ThinQ
application, use the
Product Cycle
Management
feature.
Additional Settings
1
Press the
Options
button.
2
Turn the knob to select
Additional Settings
and press the
8
(
OK
) button.
3
Turn the knob to select the desired setting
and press the
8
(
OK
) button.
en-us_main.book.book Page 43 Wednesday, December 7, 2022 8:18 AM