LG 27 Inch Electric Smart Dryer Owners Guide - Manual (Page 41)

41 OPERATION
EN
G
LI
SH
Cycle Modifiers
About Modifier Buttons
Each cycle has default settings that are selected
automatically. Customize these settings using the
cycle modifier buttons. Repeatedly press the
button for the desired modifier until the indicator
light for the desired setting is lit. Not every option
is available with every cycle. If a modifier is not
available, the button chimes twice and the setting
does not change.
• Temperature indicator lights up and the selected
setting is shown in the knob display: A Low, B
Med Low, C Medium, D Med High, E High
• Dry Level indicator lights up and the selected
setting is shown in the knob display: A Damp, B
Less, C Normal, D More, E Very
• Dry Time indicator lights up and the selected
setting is shown in the knob display: A 10-20
min, B 30-40 min, C 50-60 min, D 70-80 min, E
90-100 min
Temp.
Use this button to adjust the temperature setting.
This allows precise care of fabrics and garments.
Press the Temp. button repeatedly to scroll
through available settings.
Dry Level
Use this button to select the dryness level for the
cycle. Press the Dry Level button repeatedly to
scroll through available settings.
• The appliance will automatically adjust the cycle
time according to the selected dryness level.
Selecting More or Very will increase the cycle
time, while Less or Damp will decrease the cycle
time.
• Use a Less or Damp setting for items that you
wish to iron.
NOTE
• The appliance will automatically adjust the cycle
time according to the selected dryness level.
Selecting dry levels above Normal will increase
the cycle time. Selecting dry levels below
Normal will decrease the cycle time.
• Use dry level between Normal and Damp or the
Damp dry level for items that you wish to iron.
Dry Time
Use this button to manually select the drying time,
from 10 to 100 minutes, in 10-minute increments.
en-us_main.book.book Page 41 Wednesday, December 7, 2022 8:18 AM