AJA ROI DVI to SDI Mini-Converter User Manual
Page 23

ROI Series Mini-Converter v1.7 23 www.aja.com
NOTE: For ROI-DVI and ROI-HDMI devices, when a sink device is connected, its EDID
is passed through to the source device and the settings on the EDID tab are not
used. If no sink device is connected, the settings on the EDID tab are used.
NOTE: For ROI-DP, an additional control exists on the Genlock Tab Screen to select
whether to send the sink device's EDID to the source device or to send the EDID
Emulation settings. See
"EDID Flow Through (ROI-DP Model Only)" on page 32
for more information.
Preferred Video Format
The ROI's default EDID selection is
Auto
but it can be configured by the user to
any of the following formats and frame rates:
• Auto
• 1280x720p50
• 1280x720p60
• 1920x1080i25
• 1920x1080i30
• 1920x1080p50
• 1920x1080p60
YCbCr Support
This parameter determines whether the ROI will signal to its HDMI source that the
ROI will support (Yes) or will not support (No) YCbCr input formats.
NOTE: RGB formats are always supported by default in an HDMI sink.
Max Audio Channels
Selects the number of audio channels to be used from the signal source. Choose
from:
• 2 Ch
• 8 Ch