Cura software – 3d printer manual setting, Software, Settings – XYZprinting Crazy3DPrint CZ-300 DIY 3D Printer User Manual

Page 23: Software settings

SOFTWARE SETTINGS

The

CZ-300

printer can make your scratch design become solid objects with generated G-code from 3D files by using

software such as Slic3r, and Cura etc.

This manual assumes that users have already had the up-to-date version of software well-downloaded and installed

under relevant operating system.

Crazy3DPrint

provides the installation file –

CZ-300_3D Printer_Cura_Set-

up_1.0.4.exe

CZ-300_3D Printer_Slic3r_Setup_1.0.3.exe

– for users easily setting up the parameters in terms of

printer dimensions, extruder details, and other specific commands.

Support Cura and Slic3r and you can download the profile from below URL

1. Cura

2. Slic3r:

Users can find the software from “Software Folder” in the

SD Memory Card

; or download it from the

website via:

CURA SOFTWARE – 3D PRINTER MANUAL SETTING

1) After installation, double-click the Cura icon to display the default page.

2) Select “Add Printer” -> “Other” -> “Crazy3DPrint CZ-300”; following add the printer.

3) It is suggested that users preset the parameters as below for better print results:

Select “Manage printers” -> “Profiles”, and click “Import”