ProSoft Technology ProSoft i-View - Manual (Page 82)

Security ProSoft i-View ♦ Mobile Process Monitoring and Control Application
User Manual Version 2.0.2
Page 82 of 106 ProSoft Technology, Inc.
September 29, 2011
PROTOCOL Default Tag REMARKS
Modbus TCP/IP (Not Available) See note below.
EIP/Native SMValidationTag Any INT value. This tag must be present in order
for ProSoft i-View to communicate. Set to 0 initially
to avoid having to enter it in ProSoft i-View during
development stages.
EIP/PCCC N98:0 Any INT value. This tag must be present in order
for ProSoft i-View to communicate. You may need
to create a Data File number 98 of type Integer with
at least 1 element.
The Validation Code feature is not available for Modbus TCP/IP due to the great number of
Industrial devices supporting this protocol, which makes it impractical to establish a general way to
implement such a feature.
Validation codes are entered in the relevant fields of ProSoft i-View’s Connections view.
ProSoft i-View will store and remember codes between connections but it will reset them
to 0 for connections that changed as a result of source change.
Note that ProSoft i-View will always perform this security check. There is no way
to disable or avoid it. However you can set a custom validation tag.