ProSoft Technology ProSoft i-View - Manual (Page 80)

Network Settings for Remote Access ProSoft i-View ♦ Mobile Process Monitoring and Control Application
User Manual Version 2.0.2
Page 80 of 106 ProSoft Technology, Inc.
September 29, 2011
3 If you have a fixed IP address, enter it as such in ProSoft i-View, either as a Settings
default, or embedded in source files. .
4 If your router accesses the WAN through a dynamic IP then you must create an
account with a dynamic DNS services provider such as www.dyndns.org, and
configure your router to notify of IP changes. In this case, enter in ProSoft i-View the
name you choose for your dynamic DNS. The port number must still be the one
configured in the NAT section of your router.