Quintum Technologies Tenor Call Relay SP - Manual (Page 27)

P/N 480-0048-00-10 2-9
Chapter 2: Hardware Components
Table 2-3 Serial RS232 DB-9 Connector Pinouts
10/100 Base-T Ethernet ports. Four Ethernet ports; each port provides an RJ-45 jack for an individual con-
nection to a 10/100 Ethernet LAN switch or hub via RJ-45 cable. Each Ethernet port provides an RJ-45 jack
for an individual connection to a 10/100 Ethernet LAN switch or hub via RJ-45 cable. One port is functional;
the other three are for the future use. These three ports can be optionally purchased, when they are available.
Once functional, these ports can be configured with a unique IP and MAC address.
Figure 2-8 10/100 Ethernet Port Pin Order
Table 2-4 Input/Output 10/100 Ethernet port
Pin # Function Description
1 RSVD Reserved
2 RXD Receive Data
3 TXD Transmit Data
4 RSVD Reserved
5 GND Signal Ground
6 RSVD Reserved
7 RSVD Reserved
8 RSVD Reserved
9 RSVD Reserved
Pin # Signal Definition Color
1 TX + Transmit Data White w/orange
2 TX - Transmit Data Orange
3 RX + Receive Data White w/green
4 RSVD Reserved Blue
5 RSVD Reserved White w/blue
6 RX - Receive Data Green
7 RSVD Reserved White w/Brown
8 RSVD Reserved Brown