Dynex DX-LTDVD22-09 - Manual (Page 13)

Using your TV 13
6 Press or to select Auto Ch Memory, then press or
ENTER. The Auto Ch Memory menu opens.
7 Press or to highlight Automatic Search, then press or
ENTER.
The TV begins memorizing all of the channels available in your
area. It may take about 5 minutes
to complete memorizing
digital cable channels. Depending on the reception condition, a
bar display may not advance for several minutes.
Notes:
Memorizing channels is best accomplished during evening “Primetime”
hours, because more stations are broadcasting digital signals at that
time. Channel memorization can only be accomplished while a station
is broadcasting a digital signal.
If you are unsure of the digital channels available in your area, you can
visit www.antennaweb.org to receive a list based on your address or
Zip code.
New digital channels may be added to your area periodically. We
recommend that you perform the “Automatic Search” procedure
regularly.
All channel labels are cleared when you automatically scan for channels.
Adding channels
If you find a new digital channel you like, you can add it to the channel
memory.
To add a new channel to memory:
1 In TV mode, tune to the new channel.
2 Press SETUP/TV MENU. The initial on-screen menu opens.
3 Press or to select Channel, then press or ENTER.
4 Press or to select Add/Delete, then press or ENTER. The
Add/Delete menu opens.
5 Press or to highlight Adding Channel, then press or
ENTER. The new channel is added to the channel memory.
6 Press EXIT to return to normal viewing.
Deleting channels
You can select a channel that you want to delete from the channel list.
To delete a channel from the channel list:
1 Press SETUP/TV MENU. The initial on-screen menu opens.
2 Press or to select Channel, then press or ENTER.
3 Press or to select Add/Delete, then press or ENTER. The
Add/Delete menu opens.
Auto Ch Memory
Signal Type Cable
Digital Channel Found : 0
Analog Channel Found : 16
: Select ENTER:Cancel
Automatic Search Stop
Main Menu
Picture
Audio
Channel
Lock
Setup
ENTER : Set : Select
>>
Add/Delete >>
Clear All >>
Add/Delete
Adding Channel >>
: Select ENTER:Set
Main Menu
Picture
Audio
Channel
Lock
Setup
ENTER : Set : Select
>>
Clear All >>
Add/Delete
Adding Channel >>
: Select ENTER:Set
Add/Delete >>