Marantz SR4320N - Manual (Page 17)

11
ENGLISH
CONNECTING THE ANTENNA TERMINALS
SYSTEM A
L R
SYSTEM B
R L
VIDEO
OUT
IN
REMOTE
CONTROL
OUT IN
MONITOR
OUT
DVD
IN
DSS
IN
VCR
GND
AUDIO
R
OUT IN OUT IN OUT IN MAIN IN DVD IN DSS IN PHONO IN VCR TAPE CDR / MD
L
CD IN PRE
OUT
SERIAL NO.
AC IN
SPEAKER SYSTEMS SYSTEM A : 4 -16 OHMS SYSTEM B : 4 -16 OHMS SYSTEM A+B : 8 -16 OHMS
FM (75 Ω)
GND
AM
ANTENNA
Assembling the AM loop antenna
1 Release the vinyl tie and take out the connection line.
2 Bend the base part in the reverse direction.
3 Insert the hook at the bottom of the loop part into the slot at the
base part.
4 Place the antenna on stable surface.
Connecting the supplied antennas
Connecting the supplied FM antenna
The supplied FM antenna is for indoor use only.
During use, extend the antenna and move it in various directions until
the clearest signal is received.
Fix it with push pins or similar implements in the position that will cause
the least amount of distortion.
If you experience poor reception quality, an external antenna may
improve the quality.
Connecting an FM external antenna
Notes:
• Keep the antenna away from noise sources (neon signs, busy
roads, etc.).
• Do not put the antenna close to power lines. Keep it well away
from power lines, transformers, etc.
• To avoid the risk of lightning and electrical shock, grounding is
necessary.
Connecting an AM external antenna
An external antenna will be more effective if it is stretched horizontally
above a window or outside.
Notes:
• Do not remove the AM loop antenna.
• To avoid the risk of lightning and electrical shock, grounding is
necessary.
FM antenna
FM external
antenna
AM loop
antenna
AM external
antenna
SR4320N 01 ENG 03.11.28, 2:51 PM Page 11 Adobe PageMaker 6.5J/PPC