Hall Research VSA-51-R - Manual (Page 41)

Digital AV Room Control System
39
Buttons Tab
Enabled/Disabled
This enables or disables a button. A disabled button will not display on the control page and will not perform any action
when pressed on the UI panel.
Label
The label is the name that refers to the button. The label appears on the button on the control page.
Momentary/Toggle
If a button is set for momentary then it will perform the same action every time it is pressed. If set for toggle, it will
alternate between Action 1 and Action 2 each time it is pressed. Note that if a button is set for momentary it will perform
both Action 1 and Action 2 if both are defined.
Action 1
This is the primary action that is performed when a button is pressed.
Action 2
This is the secondary action that is performed when a button is pressed. Typically this is only used for toggle mode.