Hall Research VSA-51-R - Manual (Page 16)

14
VSA-51
2.6 VSA-V-DP
The VSA-V-DP is a modular input plate that sends VGA or YPbPr and audio to the receiver via 2x UTP cables. It also
features a local output for directing video and audio back to a local console.
VSA-V-DP Front and Rear
1. VGA input accepts both RGBHV and YPbPr signals on an HD15 connector.
2. Local VGA Output loops the VGA input signal out for use at a local display.
3. Power LED indicates power received from VSA-51-R. This should be active as long as the connection is good
and the VSA-51-R has power.
4. Audio Output loops the Audio input out for use at a local audio monitor.
5. Audio input accepts stereo audio on a 3.5mm jack.
6. RJ45 Port A connects to Port A of VGA1 or VGA2 on the VSA-51-R via Cat5 cable.
7. RJ45 Port B connects to Port B of VGA1 or VGA2 on the VSA-51-R via Cat5 cable.