Glow-worm Ultracom hxi - Manual (Page 35)

0020107233_00 - 06/11 - Glow-worm
MAINTENANCE
- 35 -
13447
Diagram 12.6
fault Codes (continued)
Diagnostic Menu
The Diagnostic Menu provides the ability to view and change
certain parameters.
See Diagram 12.7 for available parameters.
To enter the diagnostic menu:
a) Press and hold the ‘MODE’ button for 5 seconds. The
display will change to flashing ‘0’.
b) Use the ‘+’ or ‘-’ buttons to scroll to 96 (This is the
installer level access password).
c) Press ‘MODE’ to confirm, see diagnostic display 1.
Use the ‘+’ or ‘-’ buttons to view the appropriate diagnostic
number, see diagram 12.7.
If necessary the values can be changed by:
a) Pressing the ‘MODE’ button.
b) The diagnostic value flashes, see diagnostic display 2.
c) Use the ‘+’ and ‘-’ buttons to cycle through available
values.
d) The change is saved by pressing ‘MODE’ once more.
(NOTE: Only certain parameters can be adjusted)
To exit the diagnostic menu press and hold the ‘MODE’ button
for 5 seconds.
13450
13451