6 checking the configuration, 4 checking the configuration -29, Checking the configuration – Nortel Networks 8000 User Manual
Page 472
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Nortel Secure Router 8000 Series
Configuration -WAN Access
12 PPPoE configuration
—End
12.3.4 Setting the maximum number of sessions available on a
peer MAC address
Do as follows on the routers:
Step 1
Run:
system-view
The system view appears.
Step 2
Run:
pppoe-server max-sessions remote-mac number
The command configures the maximum number of sessions that can be set up on a peer MAC
address.
—End
12.3.5 Setting the maximum number of sessions available on the
local system
Do as follows on the routers:
Step 1
Run:
system-view
The system view appears.
Step 2
Run:
pppoe-server max-sessions total number
The command configures the maximum number of sessions that can be set up on the local
system.
—End
12.3.6 Checking the configuration
Run the following commands to check the previous configuration.
Action
Command
Check information about all PPPoE
sessions.
display pppoe-server session all
Issue 5.3 (30 March 2009)
Nortel Networks Inc.
12-7