Configuration files – Nortel Networks 8000 User Manual
Page 175
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Nortel Secure Router 8000 Series
Configuration -WAN Access
6 PPP and MP configuration
Compliance
PartNumber
Mode
LaserwaveLen :
Length unknown
: OC3-unknown
: HFBR-5710L
unknown Media
: unknown WaveLenth
Output queue : (Urgent queue : Size/Length/Discards) 0/50/0
Output queue : (Protocol queue : Size/Length/Discards) 0/1000/0
Output queue : (FIFO queue : Size/Length/Discards) 0/256/0
Statistics last cleared: never
Traffic statistics:
Last 300 seconds input rate 0 bits/sec, 0 packets/sec
Last 300 seconds output rate 0 bits/sec, 0 packets/sec
Usage of input bandwidth:0.00%,Usage of output bandwidth:0.00%
Input: 0 packets, 0 bytes
0 errors, 0 CRC, 0 packets too long
Output: 0 packets, 0 bytes, 0 underruns
0 CRC, 0 aborted sequences, 0 packets too long
—End
Configuration files
•
Configuration file of Router A
#
sysname RouterA
#
interface Pos1/0/0
link-protocol ppp
ppp authentication-mode pap
ip address 10.110.0.1 255.255.255.0
#
aaa
local-user rtb password simple router
#
return
•
Configuration file of Router B
#
sysname RouterB
#
interface Pos1/0/0
link-protocol ppp
ppp pap local-user rtb password simple router
ip address 10.110.0.2 255.255.255.0
#
Return
Issue 5.3 (30 March 2009)
Nortel Networks Inc.
6-49