Yamaha CDR-HD1500 - Manual (Page 20)

TURNING ON/OFF THE UNIT
Press POWER on the front panel.
When the unit turns on. the message “WELCOME TO YAMAHA
HDD/CD SYSTEM” appears on the front panel display, then the
unit becomes ready to be operated.
For information on specitfciitions such its power consumption, refer
lo “SPECIFICATIONS” (P.8.1).
Do not turn off the unit during playback or recording. Doing so
may damage the HDf) or data.
If the message “Wait” appears in the display for 20 seconds or
more after turning on the unit., the HDD may not be installed
properly. Refer to the “HDD Installation Manual” and check the
connection.
SELECTING THE OPERATIONAL DRIVE (HDD/CDR)
This unit equips the HDD and CDR drive. When operating the unit, you need to select HDD or CDR drive in accordance w'ith your purpose.
To operate the HDD drive, press HDD.
The HDD mark lights in the display, and the disc information
ttppears.
To operate the CDR drive, press CDR.
The unit starts lo read the information of a disc set in the dise tray.
When the disc information is read completely, the CDR mark lights
in the display, and the disc information appears.
When no disc is set in the disc tray, the message “No Disc” appears.
Memo
If you set a disc in the disc tray, the unit automatically switches to
the CDR drive operation mode.
MLriJ
. I LlitlLR Vtj:
1,=.:
Bllii
Q a J
... ;
- c 6
■,:YAIV|AHA
V
-HDD
-CDR
14