ITC Hemochron Signature+ Whole Blood Microcoagulation System User Manual
Page 8

8
Features
The HEMOCHRON Jr. Signature+ has a number of performance and convenience features. These are
summarized below:
•
the system is portable for bedside use
•
fresh whole blood or citrated whole blood can be used (assay dependent)
•
only one drop of blood is required
•
results are available in minutes
•
results are displayed appropriately as whole blood, plasma equivalent, Celite equivalent seconds,
or INR
•
test type is automatically read from the cuvette
•
test results are automatically stamped with date and time
•
results from 400 patient tests and 400 QC tests can be stored
•
stored results can be printed and/or downloaded to a personal computer
•
stored results can be searched by Patient ID
•
instrument self checks are automatically performed
•
Electronic Quality Control (EQC) cuvettes are used to check instrument operation at two levels
•
a Temperature Verification cuvette can be additionally used to check test chamber temperature
•
the display is illuminated for viewing in low light
•
the user is alerted when the battery is low
•
an optional printer can be connected
•
the system can be customized using a personal computer and HEMOCHRON Configuration
Manager software
•
User Notes can be entered to add additional information to the test results
•
Patient/QC test reports can be created using a personal computer and ITC data management
software programs