Autocue WinCue Pro News - Manual (Page 51)

WINCUEPRONEWS USER GUIDE
VERSION 1.30B515 51  QTV 1998
3: Left-click on the story you want to start prompting, this will select the story (shown
by the blackbar), then hold down the left 'Alt' key and press the 'Return' or 'Enter' key.
After using any one of these methods, the prompt and the WinCue prompt (yellow) bar will
move/jump to the chosen story.
3.2.12 Using 'Panic Mode' if ENPS stops working:
WinCue has a 'Panic Mode' option that allows ENPS Runorders and stories to be
manipulated from WinCue if the ENPS system stops working for any reason such as a
network failure.
IMPORTANT: The 'Panic Mode' feature should only be used as a last resort.
If 'Panic Mode' is enabled the WinCue terminal will stop trying to receive updates from
ENPS, as soon as 'Panic Mode' is disabled the WinCue terminal will re-start trying to
receive updates from ENPS.
NOTE: Any changes to the runorder and stories on WinCue while in 'Panic Mode' will
be lost as soon as 'Panic Mode' is disabled.
3.2.13 Enabling/Disabling 'Panic Mode':
Left-click on the 'Panic Mode' icon on the tool bar at the top of the screen to toggle 'Panic
Mode'. When the button is shown as pressed in 'Panic Mode' is enabled, otherwise it is
disabled:
Disabled Enabled