Autocue WinCue Pro News - Manual (Page 10)

WINCUEPRONEWS USER GUIDE
VERSION 1.30B515 10  QTV 1998
1.2 Before Installing Your Chosen Operating System
Before you install your chosen operating system you should configure your SCSI card in
accordance with the documentation supplied with it. DO NOT at this stage install any
hardware supplied with WinCueProNews. This hardware should not be installed in your
PC until the WinCueProNews software has been set up.
1.3 The WinCueProNews Package
The WinCueProNews package consists of:
Laptop users will
receive an I.M.T.
box, not the I.M.T.
scroll card
Software (4 diskettes incl. Licence diskette)
Licence (1 diskette)
I.M.T. Scroll Card
Scroll Control
Manual
1.4 I.M.T. Scroll Card
The I.M.T. scroll card allows WinCueProNews to prompt text in any language. Data from
the scroll card is sent to the prompter screen via the on-board composite video channel.
The I.M.T. card also features an on-board genlock port. In addition, an I.M.T. scroll
control can be attached to the I.M.T. card leaving all the ports on your PC free for other
peripherals.
1.5 Installing the Software
The first step in setting up WinCueProNews is to install the software. It is assumed you
have already successfully installed your chosen operating system on a PC and this
meets the minimum hardware requirements.
Warning!
If WinCueProNews is being installed on Windows NT 4.0 you will need to be
logged in with administrator privileges. If you do not have these rights contact
your computer support department.