Autocue WinCue Pro News - Manual (Page 14)

WINCUEPRONEWS USER GUIDE
VERSION 1.30B515 14  QTV 1998
1.7.3 Connecting a Composite Video Feed
The I.M.T. box is made in two versions, one has four BNC composite outputs and the
other has one. These ports supply the composite video feed to the prompter screen(s).
You can connect your video cable to the BNC output.
1.7.4 Connecting a Genlock Feed
The genlock port is the BNC port next to the I.M.T. scroll control port on the I.M.T. box.
This port accepts a genlock feed.
1.7.5Connecting a Power Supply
The I.M.T. box can be powered from one of three different sources; the mains power
supply, 12V DC and an optional PAG battery (UK version only).
A reset button is provided on the I.M.T. box to reset the I.M.T. scroll card.
1.8 Restarting Your PC
Once all the WinCueProNews hardware has been installed restart your PC.
Warning for Laptop Users !
Laptop users must switch on the I.M.T. box before switching on the laptop. This
is to ensure the PCMCIA SCSI card successfully detects the I.M.T. scroll card.
1.9 Starting WinCueProNews for the First Time
When WinCueProNews starts for the first time the following message appears, “Your
scroll control configuration is not set. WinCueProNews will now allow you to select
which scroll control your have installed”.
See Appendix C3 & C4 for further details