Autocue WinCue Pro News - Manual (Page 45)

WINCUEPRONEWS USER GUIDE
VERSION 1.30B515 45  QTV 1998
All the available runorders that have been dumped from the ENPS terminal are listed in his
box.
If the runorder that you wish to load (for prompting) is not listed in this box ensure that the
runorder has been dumped from the ENPS terminal (see 'Dumping an ENPS Runorder to
WinCue').
To open an ENPS Runorder on WinCue ready for prompting, do either of the following:
Double left-click on the runorder that you want to open.
Or
Left-click (select) the runorder you want to open and then click on the 'OK' button.
The runorder will then be opened and be set ready to start prompting 'Prompting an ENPS
Runorder on WinCue'.
3.2.5 Deleting an old ENPS Runorder from WinCue