I.R.I.S. 808 Digital Video Recorder - Manual (Page 77)

the Save dialog is shown, press ENTER to exit and save, MENU/ESC (Mouse:
Right Click) to exit without saving.
Following is a brief description for each item and its specific operations:
 Device Type – PTZ, POS, GPS, or N/A (Not Available). Press +/- buttons to
change the type. Please note that PTZ can only be selected for either
RS-232 or RS-422/485, but not both.
 Model – PTZ model, GPS protocol, or POS printer type of the connected devices.
The PTZ models supported include Pelco D protocol Dome, SamSung
SCC-641P, Kalatel Cyber Dome, PIH-series, Dynacolor, Bosch
AutoDome, Video Trek, etc. The GPS protocol supported is NMEA0183.
The POS printer types supported include Epson General (EX. Epson-TM200,
Epson-TMU300, Epson-TMU675, Epson-TMT882, Epson-RPU420, and
Epson-MD332S) and Epson-TMU295. Press +/- buttons to change the
supported model (or protocol).
 Baud Rate – press +/- buttons to change the value.
 Data Bit – press +/- buttons to change the value.
 Stop Bit – press +/- buttons to change the value.
 Parity – (Odd, Even, or None). Press +/- buttons to change the value.
 DVR/Camera ID – for PTZ => the device ID for this digital video/audio
recorder, and it must not conflict with the other devices connected in the same
control port; for GPS/POS => the Camera ID to receive the GPS/POS data,
“Multiple” for POS means multiple POS connected and camera 1 for POS ID
1, camera 2 for POS ID 2, etc.
Please note that Multiple POS is added for
RS-232 port only. Press +/- buttons to change the ID.
Some GPS Devices Tested
HOLUX GR-213 G-Mouse GPS Receiver
Garmin GPS 18 OEM
GlobalSat BR-355 Cable GPS
77