I.R.I.S. 808 Digital Video Recorder - Manual (Page 66)

time of this time segment is implicitly set as the start time of next time segment,
or the start time of the first time segment of the same weekday if it’s the last one.)
Press +/- buttons to select the desired start time.
Example: If the user sets the start time of T1/MON as 9:00, T2/MON as 18:00,
T3-T16/MON as N/A (Not Available), then T1/MON is 9:00-18:00, T2/
MON is 0:00-9:00, and 18:00-24:00.
 Alarm – record mode (No, Video, Audio/Video) when certain alarm input, speed
alarm, or acceleration alarm is triggered. “OFF” is newly added for alarm
detection OFF. Press +/- buttons to change the value.
 Motion – record mode (No, Video, or Audio/Video) when motion is detected for
certain camera. “OFF” is newly added for motion detection OFF. Press +/-
buttons to change the value.
 Normal – normal record mode, including No, V (Video only), or A/V (Audio/
Video). Press +/- buttons to change the value.
Note: In a time segment, if both Alarm and Motion are set to “OFF”, the audio/video
will be treated as Normal unless there’s Video Loss.
66