I.R.I.S. 808 Digital Video Recorder - Manual (Page 50)

6.1 Pre-Camera Setup
In Setup Menu display, press ▲▼◄► to change the highlighted option to Pre-
Camera, and then press ENTER
(Mouse: Left click) to call up Pre-Camera Setup
display.
There are up to 4 cameras which can be connected to the system. The Pre-Camera
Setup allows the administrator to define some fundamental attributes for all the
installed cameras.
The general operations are as below:
 ▲▼◄►
Press these buttons to select the items.
 Numeric
Press these buttons to select the camera.
 MENU/ESC (Mouse: Right Click)
Press this button to escape from this screen, and return to Setup Menu display. If
the contents have been modified, a Save dialog will be shown to ask the user to
save the changes, press ENTER to exit and save, MENU/ESC to exit without
saving.
Following is a brief description for each item and its specific operations:
 REC Resolution – the record resolution for all the cameras in the system. For
NTSC, it can be 720x480, 720x240, or 360x240; for PAL, 720x576, 720x288, or
360x288. Press +/- buttons to select the resolution.
 Watermark – to record with digital watermark or not. If yes, all the recorded
images for all the cameras will have digital watermark embedded. Press ENTER
50