Acme PP-32 - Manual (Page 76)

76
PP-32
KOOLMASTER PP-32
REV.01
Lo Static Alarm
Relay Assignment
1 2 3 4 5 6 7
√
5.14.6.7 Assigning Relays for the Lo Static Pressure Alarm
This relay is activated if a low static pressure alarm occurs. Refer to sec.
5.13.2 to activate/deactivate the low static pressure alarm.
Set the function to "21.Alarm
Limits" from the main menu using
the navigation buttons then press
the right-arrow key.
Use the navigation buttons to select
"2.Static Pressure" then press the
right-arrow key. Note that this menu
is only accessible if the static pressure
sensor has been enabled in the instal-
lation setup (see sec. 5.14.3).
Use the navigation buttons to select the "2. Lo Static Alarm" menu
then press the right-arrow key.
Use the right and left-arrow keys to select the desired relay. When
the item is flashing, press
to activate the relay or to
deactivate it.
Alarm Settings
1. Temperature
2. Lo Static Alarm